The Di866 Canon model is compatible with the following Canon digital SLR cameras.
[for Nikon]
D3 series / D2 series / D700 / D300 / D300s / D200 / D90 / D80 / D70s / D70 / D5000 / D3000 / D60 / D50 / D40X / D40
*The data shown above is current as of Oct. 20, 2009.
*The latest information of compatibility is available in the compatibility list.
Tired of your flash no longer working whenever a new camera comes
onto the market ? A firmware upgrade service is available for the
Di866 professional, which provides a service terminal to upload the
latest software. A charge for the firmware update service will apply,
varying depending on the area. Please check at your local dealer
for details about the update service.
COMPATIBILITY
The Di866 is compatible with two types of cameras, Canon and Nikon.
[for Canon]
EOS 1D mark III or II / EOS 1Ds mark III or II / EOS 5D mark II /EOS 5D
/ EOS 50D / EOS 40D / EOS 30D / EOS 20D / EOS 10D / EOS Kiss X3 /
EOS Kiss X2 / EOS Kiss Digital X / EOS Kiss Digital N / EOS Kiss
Digital / EOS Kiss F
KEY FEATURES
Color and Auto Rotate Display bears simple and user friendly features of our design concept
The Color Display will automatically follow camera angle in different
position and six icons interface gives user friendly operation and
representing different menus Auto, TTL, Manual/Av, Multi, Wireless
TTL (Master/Remote) and Customer Setting.
Various Functions TTL, Manual/Av, Multi Flash
TTL:
Supporting Canon E-TTL, E-TTL II and Nikon i-TTL. Flash light is
automatically controlled by the camera but the flash exposure value can
be compensated.
Manual:
Flash power can be adjusted manually at 22 levels, from full power to
1/128 power at every 1/3 stops. The appropriate distance to the
subject is shown in the display in accordance with the aperture value
set on the camera.
Av priority:
The flash light can be automatically controlled by the photo sensor
built-in the flash unit instead of TTL metering. The F. Stop can be
set from F1.4~F16. The distance at the F-stop set on the flash and
camera is shown in the display.
Multi Flash: The power ratio can be set from 1/8 to 1/128.
The best solution for off camera flash technique
The Di866 Wireless TTL system support Canon E -TTL/ E-TTL II and Nikon
i-TTL. Di866 can be used jointly with Canon and Nikon original flash
as either Master and Remote (Slave).
The Di866 also supports digital (pre-flash system) and analogue (film
type cameras flash and/or studio flash under both of Manual and Av.
priority mode.
Multi-Flash: Repeating flash for multi-exposure image in one frame.
The power ratio can be set from 1/8 to 1/128.
Sub-Flash
The Di866 provides an extra small flash below the main flash. This
small flash gives a fill-in light while bouncing the main flash.
Bouncing the light may shadow the underside of face, and this fill-in
flash brightens up the shadow.
Auto Zoom
Auto Zoom covers 24~105mm focal range. Light diffusing panel covers wide 18mm (35mm format)
My TTL
TTL exposure level is accurately calibrated for standard balance in
accordance with Nissins standard. If any adjustment is however
required, or if you like to set your own preferable level, it can be
adjust for about + _ 3Ev. by every 1/3 step.
Quick Loading Battery Magazine
The
Di866 has battery magazine system same as Di466. A convenient
battery magazine provides all four AA-size batteries slot in the same
direction, so that the batteries can be correctly inserted without fail
even in the poor light condition.
External Service Box
External Power Pack Socket Di866 supports Nissin Power Pack PS 300.
X terminal Di866 has X-terminal socket for flash synchronization. USB Service Port Di866 provides a USB port to update the latest firmware.
Rear curtain sync and High speed shutter
In Rear curtain sync., the flash fires just before the rear curtain
closed. By using this function at slow shutter speed, a moving subject
will appear with such moving
marks behind.
High speed sync. is recommended for daylight flash photography.
Flash head tilts up to 90°and rotates horizontally 90°to the right and 180°to the left.
Fill-in reflector and Light diffusing panel installed
0 comments:
Post a Comment